Air Bed Fix/Seal/Replacement Innomax Leak Fix for Air Beds

Description

This Item will help you fix a leak from your air mattress that comes from the connector between the tube and the air bladder itself. The tube this is designed after is 18mm thick.
I used this on my Innomax bed with its Luxury Support feature.
Steps to use:
1. Deflate mattress and remove air hose from mattress fitting. This may require some twisting.
2. Starting at the end of the hose, apply a thin layer of silicone sealant for about 3.5  inches. This allows the fitting to be placed on the hose and promotes sealing against air leaks. Slide fitting onto the hose with the flange portion away from the mattress. The hose should extend about 3 inches from the end of the fitting.
3. Place silicone on the outside of the fitting and onto the hose and push the fitting and hose into the air mattress fitting. Due to the close tolerance, you may only be able to push the fitting 0.5 inches. Do not twist. Use hand pressure only.
4.  Once the tube is inserted into the bladder apply more silicone around the hose/fitting juncture and around the fitting/air mattress juncture.  See diagram.
5. Let dry for the time listed on your silicone.
General Dimensions are pictured. Please let me know if you have any questions. Item is  3D printed to order, out of PLA plastic, in the USA. You will need your own silicone sealant.